Away from the clubrooms Mr C pressed on with the ADR brake van, adding detail to the ends. Then the internal partitions were completed with doors and handles.
The two L shaped sections were the tried together to complete the box and the alignment was very good. After soldering together the partitions were slide down in place and fitted after a little trimming. The body is pretty rigid and square.
![](https://newportmrs.wales/wp-content/uploads/2024/01/2024-01-TyCc-ADR-GBV-07-1024x785.jpg)
![](https://newportmrs.wales/wp-content/uploads/2024/01/2024-01-TyCc-ADR-GBV-11.jpg)
![](https://newportmrs.wales/wp-content/uploads/2024/01/2024-01-TyCc-ADR-GBV-12.jpg)